PRESS RELEASE FOR FORD F-100 REAR AXLE LOWERING KIT

Need an easy way to lower the rear axle of your 1965-79 Ford pickup? This newest design by Fatman Fabrications will drop the truck 5” in the back, using the original axle, without any welding being involved. A special bracket allows the axle to be shifted to the top side of the stock rear leaf springs, and a new pair of proper length shocks are bolted to special axle brackets. The frame rail does need to have clearance cut for the “C” in the frame reinforcement plate, which bolts in place to finish the job, providing vertical clearance for the repositioned axle. Normal weights can still be carried, and this kit won’t weigh down your wallet too much! Check it out with the Fatman tech staff at (704) 545-0369 www.fatmanfab.com

MOPAR 2" dropped spindles with Wilwood brake option

6265 Fairlane Strut kit parts

We are working on new suspension for the 62-65 and 66-71 Fairlane/Torino. They will be using strut type suspension and our polished stainless steel tubular control arms. See the Products section page 33 for details, This kit is used on the Ring Brothers "Afterburner" Fairlane Project; and additional photos follow:

6566 Mustang PSM (power Suspension Module)

Geo Metro full tube chassis and 922 HP Duttweiler

Bob Brasfield's Geo Metro recieveing a full tube chassis and all new suspension, to be powered by a twin turbo 922 HP Duttweiler all aluminum small block Chevy.

1960 Cadillac with a Fatman frame stub and Stage III coilover IFS

55 Packard with Fatman Frame stub and Coilover IFS

55 Pontiac with Fatman frame stub and 389 Pontiac

Volvo 544 sedan with new 2 x 3 front frame rails and Fatman coilover IFS

Sitemap