Call Us : (704) 545-0369

Email: sales@fatmanfab.com

Mustang II Tie Rod Ends

Need more info about this product?

Contact us!

Mustang II GTECH Tie Rod Ends

Get these brand new Mustang II Tie Rod Ends for your Mustang II Independent Front Suspensions.  Many hot rods today use higher caster settings in the range of 3-5 degrees resulting in better stability at Interstate speeds, reducing the light effort due to power rack & pinions.

 

Since Mustang II spindles were originally designed to run at 1-degree positive caster, this rolling back of the spindle for greater caster also has the effect of raising the outer Tie Rod End. That rise can be enough to create some residual bumpsteer.

 

These new GTECH Tie Rod Ends have a special longer stud to return the Tie Rod to its proper height! The suspension photo shows the proper relationship, with the tie rod assembly going slightly downhill toward the center of the car, as compared to the lower control arm, in order to achieve proper instant center location.

 

If your Tie Rods angles are steeper than shown, these trick Tie Rod Ends will reduce the bumpsteer you feel. These Tie Rod Ends are only offered through Fatman Fabrications, and they are STANDARD equipment on Fatman Mustang II Kits with power assist!

 

Price: $46.00 (Pair)

 

Fatman Fabrications

8621-C Fairview Rd. Hwy. 218 Mint Hill, NC 28227
Phone: (704) 545-0369 Contact Fatman Fab Today!

The Best chassis for Your car

Street Rod Suspension Systems

(704) 545-0369 OR

Fatman Fabrications | 8621-C Fairview Rd. Hwy. 218 Mint Hill, NC 28227 | Phone: (704) 545-0369 | M-Thurs 8:00am-6:00pm EST | Friday 8:00am-12:00pm EST

Copyright © 2016 - 2017 - Fatman Fabrication | Site Design by Pro Image One