Mustang II Frame Stubs
Need more info about this product?Contact us!
Some cars have a frame that doesn’t allow a simple MII installation, yet are too narrow for a GM subframe. For these cars we build frame stubs which allow a 2”-4” drop and include pre-made mounts for bumpers and sheet metal. Sheet metal remounts with very minor or no trimming required. We make a wide variety of Mustang II frame stubs for a multitude of makes and models. If you don’t see your vehicle listed below contact us and we will be more than happy to discuss your specific application.
We can build the front half of any of our frames offered. These work great to repair a botched subframe installation. By reproducing the axle center line and radiator core support positions your bumper and sheet metal will refit with ease.
NOTE: For 1937-54 Chevrolet Cars, 19 37-59 Chevrolet Trucks, 1935-40 Ford Cars & 1948-56 F-100 Pickup Trucks.
Basic MII Kit
With Frame Rails,
|up to 1957||1958 & up|
Stage II Kit
Tubular Steel Arms, Standard Coil Springs
Stage III Kit
QA1 coilovers, Tubular Steel Arms
Stage IV Kit
Cool Ride Tubular Steel Arms
Stage V Kit
Shockwave Tubular Steel Arms
Non-adjustable Stage V Option
|2” Drop Spindles||(No additional charge)|
|Power Rack||add $150.00|
|Front Sway Bar||add $180.00|
|5” Bolt Circle
(12″ disc brakes)
Please Note: Some Mustang II Frame Stubs will require tubular control arms.
|Austin A-40/Princess||Jag MK7 (2″ Narrow)||MK 5|
|Buick (Check Series)||34-59||Lincoln||49-57|
|Cadillac (Check Series)||34-68||Mercury||49-56|
|Chevelle||64-72||Olds (Check Series)||34-63|
|Dodge (Original Engines May Not Fit!)||34-59||Packard (Check Series)||35-56|
|Ford (Original Engines May Not Fit!)||49-66||Plymouth||34-58|
|Lark, Avanti, Rover, Sunbeam|
Fatman Fabrications | 8621-C Fairview Rd. Hwy. 218 Mint Hill, NC 28227 | Phone: (704) 545-0369 | M-Thurs 8:00am-6:00pm EST | Friday 8:00am-12:00pm EST
Copyright © 2016 - 2017 - Fatman Fabrication | Site Design by Pro Image One